Faucet Aerator Brushed Nickel

very impressed with the quality of the faucet. It is all chrome, simple classy design that works well. is a vast improvement to the flow on the existing kitchen tap. What i like most is it saved me having to change the whole tap fitting just because i wanted a soft water flow. The adjustable spray \ sprinkle option is brilliant. I love it. For those that already have a mixer tap but would benifit from a soft flow dual faucet update this is definately recommended. Just ensure to check the faucet size and male or female thread requirement. P.S. tip use a bit of ptf tape around the thread before attaching faucet to tap. This will stop any leaking from the connection when in use. UPDATE... It's two years since I first bought this faucet add on, and it continues to work as intended. I recently used a scale away product when I noticed it had a build up around the edges. removal and reconnecting was really easy if you are lucky enough to have a good basin wrench or pliers. Add on thick tape on the outside to avoid scratching the surface. after cleaning reapply your PTF tape and reconnect. GOOD AS NEW I have added a before and after photo.

Sometimes you come across a product that you absolutely just have to tell everybody about. This is one of those products! First of all, it looks good. No. It looks fantastic! It’s a beautifully simplistic design. It’s no bigger than it needs to be, it doesn’t have buttons, it doesn’t need them. It works by a simple, easy twisting motion, either clockwise or anti-clockwise. The spray function is perfect for lathering up your detergent and clearing debris from plates etc. The normal stream function is slightly aerated, which I love. The ball joint has a beautifully smooth action. Fitting the device couldn’t have been simlper. It honestly took me five minutes, and that was because I was slightly pontificating over the device as it was so simple I thought it must be wrong. I could not be happier with this. Buy it. Fit it. Be happy.

I don't normally do reviews but want to for this. I've been looking for something like this for a while and at £20, which is expensive and cheap depending how you look at it, I thought I 'd give it a try, though dubious. The fitting of it is a doddle, with a spanner to remove old one and put this in its place. It functions as described and is versatile and pleasant to use, though as pointed out, it is rather restricted in the angle, but works for me. A too wider angle could accidentally allow water to shoot out of the sink. I think around 40 degrees would of been ideal, but I'm ok with this. In regards to build quality, this is where my engineering background comes into play. The solid brass description was skeptical and to me the first section is definitely a solid metal, but the larger body where the water come out from does not feel (weight, taping resonance) metal at all rather plastic and here lies another issue. As the larger second seems to be made of plastic, at full open of the tap the sound it makes is quite loud when compared to my other water saving aerator. When you have it on either flow option it is significantly louder than my previous one. This is partially to do with mechanism and build material, hence the plastic. If it was made of metal too (brass) being denser, the sound would be dampened significantly. In regards to water saving, it much less than my previous one. I guess they definitely meant, compared to a standard bubbler/aerator. The one I previously had on was a Neoperl 5 litres per minute with a silicone base (slc) to aid cleaning. This waternymph works out to about 9.5 lpm and 6.8 lpm from the two settings. Overall, its a good concept and fair build but as my title suggest could be much better for the price. The neoperl with its much more superior aerator (though only single flow type), and solid brass holder was only £6. If they made one, I would have purchased it instead with more assurance of quality. For now this will suffice, but want to figure out how to restrict the flow further.

Having bought a cheap version from "the middle aisle" that leaked and disintegrated within days I didn't have much hope that this one would be any better. I was completely wrong. Easy to fit (once I managed to remove the old one), no leaks, and I am finding it a surprisingly good quality of life improvement over the original.

I attached this to my GROHE kitchen tap for daily use. It looked great, just like it was originally came with the GROHE tap. The quality was much better than I expected. Pro: This shorter version was much better than the longer version on Amazon. I didn’t need to move the tap out of the way before I put any high pots or big wok into the sink. Cons: Although it can be rotated but the angles were not able to reach out the four corners fully when I needed to clean the sink. I had to buy a longer version and switched them around when I clean the sink.

It took about 30 seconds to remove the existing Tap Fitment, and fit the Waternymph. The reason for fitting the Waternymph, was the existing Aerator was causing a lot of splashing, due to the distance between the Tap, and the Sink Base. Now, especially set to Soft Bubble, it's an entirely different experience. It looks ferocious, and powerful, but it is gentle and soft. In the Spray Mode (just a small clockwise, or anticlockwise twist) then you get a forceful flow. Not only does it save water, but in Spray Mode you save a massive amount of washing up liquid. Massive amount of Foam, so cut down on the use of Washing Up Liquid. (Another cost saving bonus) A wee bit difficult to change settings, with wet hands, due to the Smooth Barrel, but not a great problem. Can't do without it now. December 2024 Exactly 4 Years later, after constant usage, the Waternymph has started leaking. The leak is at the Ball and Socket area of the device. The Chrome Plating has worn away. Ah well it was Brilliant while it lasted.

Ich war sehr überrascht, als ich das Paket öffnete und sah, dass der Siebstrahlregler (oder wie auch immer die genaue Bezeichnung für dieses Produkt ist) in einer edlen Aludose verstaut wurde. Der Regler an sich macht auch einen sehr wertigen Eindruck, selbst wenn er wohl aus verchromten Kunststoff ist. Er war schnell und einfach per Hand montiert. Eine Abflachung für Schraubenschlüssel oder Zange gibt es nicht. Aber er hält trotzdem dicht und macht einen schönen Wasserstrahl. Durch Drehen des Reglers kann man zwischen geradem Strahl und Sprühstrahl wählen. Man spürt eine "Rasterung" beim Drehen, daher ist die Wahl des Strahls nicht stufenlos. Der Kopf an sich lässt sich außerdem in ca. 30° Winkel abknicken, sodass man beispielsweise einen Topf schön rundherum ausspülen kann. Alles in allem ein sehr schönes Produkt. Einzig: der Preis ist ein wenig happig. Hätte gerne auf die Aludose verzichtet und etwas weniger gezahlt.

Pequeño, fácil de manejar (con 1a mano), parece de buena calidad. Es de color "mate" y en mi caso parece que es tal cual como el grifo por lo cual parece que es una instalación original.

Funciona perfectamente y se adapta muy bien al grifo. El color es acero mate, indéntico al del grifo. Sólo he encontrado una pequeña pega. Cuando sea necesario poner el adaptador, como es mi caso, el color de éste no es mate, es brillo.

Leicht Montage, mit Adapter für innen und außen Gewinde. Ist nicht ganz billig, aber ein SUPERTEIL. Besser als die billigen Angebote für fünf Euro in Bauhaus. Wer es sich leisten kann, sollte nicht lange überlegen. Diese Teil ist sehr zu empfehlen. 1000 Punkte. Gerhard W.

Pro: - estetica; - semplicità di montaggio; - presenza della doccetta e buon angolo di copertura dello snodo. Contro: - è quasi impossibile azionare il cambio getto/doccia con le mani bagnate; - inoltre non si può sapere in che posizione è (getto oppure doccia) senza prima aprire il rubinetto. Sarebbe stato sufficiente che le due parti rotanti fossero leggermente zigrinate o sagomate in modo da non scivolare fra le dita e che ci fossero dei riferimenti stampati ad indicare la posizione (getto singolo o doccia). Visto il prezzo si poteva fare di meglio!